FLUKE 787 Loop Calibrator/DMM/Processmeter
PRODUCT FEATURES :
- Clear LCD with backlight; 4,000 counts (30,000 counts for dc current)
- Externally accessible battery for easy battery changes.
- 1000V overload protection on V, ohms,frequency.
- 150V overload protection on mA, backed up by 440 mA 1000V fuse.
- 25% Manual Step plus Auto Step and Auto Ramp on mA output.
- Current Measurement Range 0-1 A, Range:0-30 mA
- Current Sourcing Range: 0-20 mA or 4-20 mA
- Frequency: 199.99 Hz, 1999.9 Hz, 19.999 kHz
- Diode Test 2.400 V (shows diode voltage drop)
- Continuity Beeps for resistance
- DC Current Output(Internal batteryoperation)
- 0.000 to 20.000 mA or 4.000 to 20.000 mA
- Current adjustment modes Manual: Coarse, Fine, 25% step , Automatic: Slow Ramp, Fast Ramp, 25% step
- VOLTAGE RANGE: 0-1000 V AC OR DC
- CURRENT MEASUREMENT: 0-30 MA
- RESISTANCE , FREQUENCY , CONTINUITY AND DIODE TEST
Related Products
-
Fluke 715 Volt/mA Calibrator
PRODUCT FEATURES :
- Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution
- Measure voltage output process signals from PLCs, transmitters
- Source or simulate 24 mA loop current
- Source voltage to 100 mV or 10V
- 24V loop supply with simultaneous current measurement
- Enhanced voltage and current measure and source accuracy
- Improved battery life
- 250 ohm HART resistor with loop power
- Holster features test lead storage
- Compatible with toolpack magnetic hanging system
- Step and linear ramp output function
- Configurable zero and span settings
- Measure / Source mV Range: 0 to 200 mV
- Measure / Source V Range: 0 to 20 V
- VOLTAGE RANGE: 0-100 MV, 0-10 V
- CURRENT MEASURE: 0-20 MA, 4-20 MA
- LOOP POWER: 250 OHM WITH HART RESISTOR
-
FLUKE 707 Loop Calibrator
PRODUCT FEATURES :
- The Fluke 707 Loop Calibrator is a high performance solution for calibration, repair and maintenance of current loops. The new “Quick Click” knob making it extremely fast and easy to use.
- mA sourcing, simulation and measurement
- 24 V Loop supply with mA measure, including 250Ω HART resistor
- 0-28 VDC measurement to check Loop Voltage
- 1 µA resolution for mA source, simulate and measure.
- Push button 25% steps for fast, easy linearity checks.
- 0-100% “span check” for fast confirmation of zero and span.
- Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests.
- 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM.
- Measures V dc to 28 V.
- Single 9V battery that is easily changed without braking calibration seal
- 0 – 20 mA or 4 – 20 mA default start up modes.
- Innovative output adjustment dial with 1 µA and 100 resolution.
- HART ™ mode connects 250 Ω resistor in series with 24 V loop for compatibility with HART communicators.
- VOLTAGE RESOLUTION: 1 MV
- LARGE DISPLAY AND SIMPLE, QUICK-CLICK INTERFACE FOR EASY ONE-HANDED OPERATION
- HIGHER ACCURACY : 0.015%
-
FLUKE 705 Loop Calibrator
PRODUCT FEATURES :
- A large display and simple, pushbutton interface for ease of use.
- Simultaneous mA and % readout for quick, easy interpretation of readings.
- mA accuracy of 0.02%
- Push button 25% steps for fast, easy linearity checks. Save time over traditional knob type controls.
- “Span Check” for fast confirmation of zero and span.
- Selectable slow ramp, fast ramp, and step to provide smooth outputs for valve slewing and loop functional tests.
- 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM.
- Single 9V battery that is easily changed.
- 0 – 20 mA or 4 – 20 mA default start up modes.
- Current Measurement Range: 0 to 24 mA
- Current Sourcing Range:0 to 20 mA or 4 to 20 mA
- Current Simulation Range:0 to20 mA or4 to 20 mA
- Loop Power While measuring mA, 24 V
- Voltage measurement Range: 0 to 28 V DC
- VOLTAGE RANGE: 0-28 V DC
- CURRENT RANGE: 0-24 MA
- LOOP POWER MEASURING MA-24 V
- CURRENT: MEASUREMENT , SOURCING AND SIMULATION
