MEGGER DET4TD2 and DET4TR2
PRODUCT FEATURES :
- 3 1/2 Digit High contrast liquid crystal display.
- IP 54 Protection.
- C spike, P stake and noise check: Automatic.
- Noise rejection: 40V peak to peak.
- Resistance range: 0.01 Ohms to 20K Ohms.
- Earth Voltage range: 0-100Volts.
- 0.01 TO 20K OHMS
- 2-WIRE, 3-WIRE & 4-WIRE TEST
- EARTH VOLTAGE: 0-100 VOLTS
Related Products
-
You've just added this product to the cart:
HIOKI Ft-6380/Ft 6381 Clamp On Earth Tester
Read MoreQuick ViewHIOKI Ft-6380/Ft 6381 Clamp On Earth Tester
PRODUCT FEATURES:
- Earth resistance measurement for multi-grounded systems
- Measure leak current with absolute certainty with highly sensitive 0.01 mA resolution (at 20.00 mA range)
- Measure load current up to 60.0 A range
- Clamp at the narrowest point
- data transfer to Android phones using Bluetooth wireless technology (FT 6381)
- Real time data transfer, automatic report generation on Android phone (FT6381) .
DOWNLOAD PDF FILE
-
You've just added this product to the cart:
CIE DET 2000 Digital Earth Resistance Tester
Read MoreQuick ViewCIE DET 2000 Digital Earth Resistance Tester
PRODUCT FEATURES:
- Rugged ABS body
- Easy to use hand held meter
- Ni-cd Re- chargeable cells
- Facility as to make bench top type instrument
- Confirms to ISS : 9223/1979
- Four terminals (To measure earth resistance as well as specific soil resistivity)
- Lo-bat or A indication appears on Display indicating that the indicating the cells (batteries) have gone down, which can be recharged by connecting to 230V, 50 Hz AC mains supply through charging cord provided with the instruments.
DOWNLOAD PDF FILE
-
KYORITSU KEW 1061 Multi Function Tester
PRODUCT FEATURES :
- Advanced Anti-Trip Technology(ATT) to avoid RCDs to trip during loop testing.
- Earth Measurement: 20/200/2000Ω (Auto-Ranging)
- Insulation Voltage selection range: 250 V/500 V/1000 V. Resistance:20/200/2000 MΩ(Auto ranging)
- Continuity:20/200/2000Ω (Auto-ranging)
- Loop Impedance:L-PE, L-PE (ATT), L-N / L-L rated voltage – 100 to 500 V
- PSC (L-N/L-L) / PFC (L-PE) rated voltage – PSC: 100~500 V 50/60 Hz , PFC, PFC (ATT): 100~260 V 50/60 Hz.
- RCD Trip current setting(X1/2, X1, X5, Ramp, Auto,Uc)- 10/30/100/300/500/1000mA . Trip current duration:X1/2: 2000ms , X1: G:550ms / S: 1000ms , X5: 410ms , Ramp: Goes up by 10% from 20% to 110% G:300ms/S:500msX10 times .
- Phase Rotation:50-500V 50/60Hz.
- Voltage:25 to 500V
- Frequency:45 to 65 Hz .
-
Kyoritsu 4200 Earth Clamp Tester
PRODUCT FEATURES :
- The earth resistance from 0.05 to 1200Ω can be measured without the auxiliary earth spikes.
- accurate true RMS readings of AC current including distorted waveform from 1mA to 300A.
- A function to detect current, which effects an earth resistance measurement and display “NOISE” mark on the LCD.
- save and display up to 100 measurement data
- Compliant with safety standards of IEC 61010-1 : CAT IV 300V Pollution Degree2
- over range indication
-
Kyoritsu 4105A Digital Earth Tester
PRODUCT FEATURES :
- Earth Resistance:- 0~20Ω/0~200Ω/0~2000Ω
- Earth Voltage :- [50,60Hz]: 0~200V AC
- Overload Protection Earth Resistance: 280V AC for 10 seconds across 2 of the 3 terminals Earth Voltage: 300V AC for 1 minute
- Designed to meet IEC 61010-1 safety standard.
- Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance.
- 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.
- DUST AND DRIP PROOF(DESIGNED TO IEC 529 IP54)
- OVERLOAD PROTECTION
- CAPABLE OF MEASURING EARTH VOLTAGE.
