-
100A AC/DC Clamp Meter
PRODUCT FEATURES:
- Model :UNI-T 210E
- VFC, low pass filter
- NCV
- Ergonomic and lightweight
- Auto range, 2~3/s sampling rate
- True RMS
- ZERO mode
- LCD backlight, data hold
- Auto power off, low battery indication
DOWNLOAD PDF FILE
-
400A AC Clamp Meter
PRODUCT FEATURES:
- Model: UNI-T 202A
- Auto range
- Data hold/auto power off
- MAX mode
- K-type temperature probe
- 3/s sampling rate
- Low battery prompt, over-range prompt and auto polarity display
DOWNLOAD PDF FILE
-
Fluke 355 Digital Clamp Meter
PRODUCT FEATURES:
- Reliably handle a wide range of high-current applications with 2000A AC/DC True-RMS1400A AC, and 2000A DC
- The large 58mm (2.3″) jaw capacity is suitable for large or multiple conductors
- CAT IV 600 V, CAT III 1000 V rating for added user protection
- In-rush current measurement captures “power-on” surge current with Accuracy and repeatability
- Accurately measure frequency up to 1kHz for optimum troubleshooting
- Quickly analyze readings using the MIN, MAX, and AVG functions
- A large backlit display allows for easy visibility in low-lit areas
- Use the display hold feature to capture readings even when the display cannot be viewed
- Use the low-pass filter to smooth out noisy loads and stabilize readings .
DOWNLOAD PDF FILE
-
HIOKI Ft-6380/Ft 6381 Clamp On Earth Tester
PRODUCT FEATURES:
- Earth resistance measurement for multi-grounded systems
- Measure leak current with absolute certainty with highly sensitive 0.01 mA resolution (at 20.00 mA range)
- Measure load current up to 60.0 A range
- Clamp at the narrowest point
- data transfer to Android phones using Bluetooth wireless technology (FT 6381)
- Real time data transfer, automatic report generation on Android phone (FT6381) .
DOWNLOAD PDF FILE
-
HIOKI 3283-20 Clamp On Leak Hitester
PRODUCT FEATURES:
- measure leak current using highly sensitive 10uA resolution (at 10.00 mA range)
- Indicate 50/60 Hz leak current components with the filtering function
- Monitor leak current conditions in combination with a Memory HiCorder (monitor output, Model 3283 only)
- 3283-20: EN 61010-2-032:2012 Type A to measure uninsulated hazardous live conductors such as busbars .
DOWNLOAD PDF FILE
-
Hioki 3287/3288 Clamp AC/DC Hitester
PRODUCT FEATURES:
- Model 3288-20: True RMS
- Use the 3288 for high current measurements such as UPS emergency batteries and train motors
- Voltage, resistance, and continuity check functions
DOWNLOAD PDF FILE
-
HIOKI 3291-50 Clamp On Leak Hitester
PRODUCT FEATURES:
- Measure for leakage current and load all with the same device
- Innovative flip clamp design
- Flip display to see measurement readings from any angle
- 1mA to 1000A accuracy guaranteed
- 6 ranges and bar graph display
- Measure and display only the leakage current of commercial frequency components using the filter function .
DOWNLOAD PDF FILE
-
HIOKI 3293-50 Clamp On Leak Hitester
PRODUCT FEATURES:
- Measure for leakage current and load all with the same device
- Innovative flip clamp design
- Flip display to see measurement readings from any angle
- 1mA to 1000A accuracy guaranteed
- 6 ranges and bar graph display
- Measure and display only the leakage current of commercial frequency components using the filter function .
DOWNLOAD PDF FILE
-
Hioki 9661-500A AC Clamp On Sensor
PRODUCT FEATURES:
- For inverter devices or commercial power lines
- Measure up to 500 A
DOWNLOAD PDF FILE
-
Hioki 9669 Clamp On Sensor
PRODUCT FEATURES:
- For inverter devices or commercial power lines
- Measure up to 1000 A
DOWNLOAD PDF FILE
-
HIOKI CT9667 AC FLEXIBLE CLAMP SENSOR
PRODUCT FEATURES:
- Thinner cables are easy to use in confined spaces and with complicated wiring
- Shaped so that it’s easy to route through complex wiring
- Easily supports large current measurements up to 5000 A
- Wide 10 Hz to 20 kHz band with excellent frequency characteristics
- Choose from three conductor diameter sizes
- Combine with Hioki power meters or Memory HiCorders
DOWNLOAD PDF FILE
-
HIOKI-3281/3282 Digital Clamp On Hitester
PRODUCT FEATURES:
- Measure current up to 600A
- Multi-functional testing . of AC current, voltage, frequency, resistance and wave peak value
- Non-fuse type protects up to 600 V AC .
DOWNLOAD DPF FILE
- Home
- Our ProductsNEW
CATEGORY
CATEGORY
- Electrical Testers
- Clamp On Power Meters
- Breath Alcohol Tester
- Capacitance Meters
- Dial Indicator
- Block Level Meter
- CO2 Analyzer
- Contact Type Thermometers
- Data Loggers
- Coating Thickness Gauge
- EMF Testers
- Force Gauge
- Insulation Testers
- Loop Calibrator
- LUX / UVA-UVB Meters
- Manometer
- Milli/Micro-Ohm Meters
CATEGORY
CATEGORY
CATEGORY
FREE SHIPPING
For all those who like our FB page.FIVE STAR RATING
Rated 5 Star by our customers.ONLINE SUPPORT
Online Support Available.
- About Us
- Contact Us