-
Kyoritsu 6016
PRODUCT FEATURES :
- Advanced Anti-Trip Technology(ATT) to avoid RCDs to trip during loop testing.
- Continuity Range: 20/200/2000Ω (Auto-ranging)
- Short circuit current: Greater than 200mA
- Insulation Open circuit voltage (DC): 250V, 500V, 1000V , Resistance:20/200/2000MΩ (Auto-ranging) Open circuit voltage (DC): 250V, 500V, 1000V
- Voltage:25 – 500V
- Frequency: 45 – 65Hz
- RCD:Trip current(X1/2, X1, X5, Ramp, Auto,Uc) setting:10/30/100/300/500/1000mA , Trip current Duration: 2000ms
- Earth Resistance: 20/200/2000Ω Auto-Ranging
- Phase rotation: Rated Voltage 50-500V 50/60Hz
- Loop Impedance: Rated Voltage- 100V to 500V (L-PE, L-PE (ATT), L-N / L-L)
- PSC (L-N/L-L) / PFC (L-PE):Rated Voltage- PSC- 100~500V 50/60Hz , PFC, PFC(ATT)- 100~260V 50/60Hz .
- INSULATION RANGE: 250/500V
- CONTINUITY
- LOOP IMPEDANCE
- PSC / PFC MEASUREMENT
- RCD MEASUREMENT
- PHASE ROTATION
- AC VOLTAGE MEASUREMENT
- FREQUENCY MEASUREMENT
-
Digital Kyoritsu 1020R
PRODUCT FEATURES :
- Large display with 6000 counts and Backlight
- True-RMS
- MIN/MAX function
- Rugged and reliable
- Clamp sensor mode
- IEC 61010-1 CAT IV 300V/CAT III 600V/CAT II 1000V
-
6000 Counts, 1000V AC/DC Measurement
-
200.0 AMPS AC/DC Clamp Sensor Option.
- OHMS
- Frequency
-
Capacitance
- Diode, Contunity & Duty Cycle.
- 6000 COUNTS, 1000V AC/DC MEASUREMENT
- 200.0 AMPS AC/DC CLAMP SENSOR OPTION.
- OHMS
- FREQUENCY
- CAPACITANCE
- DIODE, CONTUNITY & DUTY CYCLE.
-
Digital Kyoritsu 1012
PRODUCT FEATURES :
- True RMS can measure and indicate distorted waveforms
- 6040 counts with Bar Graph display
- MIN/MAX function enables to record min & max value
- REL(relative value) function to indicate the measurement variation

- 6000 COUNTS
- AC-TRMS
- DIODE,DUTY CYCLE
-
Digital Kyoritsu 1011
PRODUCT FEATURES :
- Temperature measurement, selectable for ºC and ºF
- 6040 counts with Bar Graph display
- MIN/MAX function enables to record min & max value
- REL(relative value) function to indicate the measurement variation

- 6000 COUNTS
- DIODE, DUTY CYCLE
-
Digital Kyoritsu 1019R
PRODUCT FEATURES :
- Elegant shiny-black finish
- Comes with user-friendly Hard case
- Large Display
- Accurate reading with True-RMS technology
- Electronic protection (no fuse!) on ohm and continuity ranges
- Safety Standard
- IEC 61010-1 / 61010-031 / 61010-2-033 CAT III 300V / CAT II 600V

- AC-TRMS
- 6000 COUNTS
-
Digital Kyoritsu 1009
PRODUCT FEATURES :
- Display : 4000 counts.
- Auto range and manual range selector provided. (with range hold feature)
- Resistance range provides audible continuity test.
- Automatically turns power off in about 30 minutes to conserve battery life.
- Direct current measurement up to 10A AC and DC.
- With Holster

- 4000 COUNTS
- DIODE, DUTY CYCLE
-
Digital Kyoritsu 2012R
PRODUCT FEATURES :
- Innovative multimeter with current measurements up to 120A AC/DC
- Unique open jaw technology for AC/DC current measurements.
- Very Compact and as reliable as traditional full size multimeter.

- TRUE-RMS
-
Fluke 87V
PRODUCT FEATURES :
- True-rms ac voltage and current for accurate measurements on non linear signals
- Selectable filter for accurate voltage and frequency measurements on motor drives
- 4-1/2 digit mode for precise measurements
- Built-in thermometer lets you carry one less tool
- Resistance, continuity and diode test
- Min/Max and average recording to capture variations automatically
- Frequency to 200 kHz and % duty cycle
- AC/DC Maximum Amps 10A (20 A for 30 seconds maximum)

- AC/DC MAXIMUM VOLTAGE 1000V
- MAXIMUM RESISTANCE 50 MΩ
- MAXIMUM CAPACITANCE 9,999 µF
- MAXIMUM DUTY CYCLE 99.9%
-
UNI-T UT 33D Digital Multimeter
PRODUCT FEATURES :
- DC Voltage: 200mV / 2000mV / 20V / 200V / 500V
- AC Voltage: 200V / 500V
- DC Current: 2000µA / 20mA / 200mA / 10A
- Resistance:: 200 Ohm / 2000 Ohm / 20 kOhm / 200 kOhm / 20 MOhm / 200 MOhm
- Diode
- Continuity buzzer
- Data hold
- Low battery display
- Square wave output
- Input impedance for DC Voltage Measurement: 10 MOhm
- Display backlight

- DIODE TEST AND DATA HOLD
- DIGITAL BACKLITE DISPLAY
-
KUSAM MECO 2718 Clamp Multimeter (400A AC )
PRODUCT FEATURES :
- DC Voltage: 200mV / 2V / 20V / 200V / 600V
- AC Voltage: 2V / 20V / 200V / 600V
- AC Current: 2A / 20A / 200A / 400A
- Resistance: 200 Ohm / 2 kOhm / 20 kOhm / 200 kOhm / 2 MOhm / 20 MOhm
- Temperature: from -40 to +1000°C, from -40 to +1832°F
- SPECIAL FUNCTIONS: Auto ranging, Diode, Continuity buzzer, Max Hold, Data Hold, Full icon display, Sleep mode, Low battery display
- Input impedance for Voltage measurement: 10MOhm
- Max. display 1999 (35.6 x 18mm)
- AC CURRENT : 2A/20A/200A/400A
- RESISTANCE AND TEMPERTURE
-
METRAVI DT-2250 Digital Clamp Meter
PRODUCT FEATURES :
- AC Voltage : 0 – 400m/4/40/400/600V
- DC Voltage : 0 – 400m/4/40/400/600V
- AC Current : 0 – 40/400/1000A
- Resistance : 0 – 400/4k/40k/400k/4M/40M.Ohms
- Temperature: -50°C to 1000°C / -58°F to 1832°F
- Frequency : 0 – 5/50/500/5K/50K/500K/5M/10MHz
- Capacitance: 0 – 40n/400n/4u/40u/100uF
- Duty Cycle : 0.5 – 99.0%
- Diode Test and Continuity Test
- Confirms to CE, IEC 61010, CAT-III 600V
- Overload Protection of 500V DC/AC RMS in Resistance
- AC CURRENT RANGE: 0-40/400/1000A
- DIODE, CONTINUITY, DUTY CYCLE TEST
-
AC DIGITAL KYORITSU 2117R
PRODUCT FEATURES :
- Fully Safety jaw
- Ergonomic over-molded body gives convenient one-hand operation
- Large easy-to-read display with 0.01A resolution
- Accurate reading with True RMS
- 60/600/1000A auto-ranging
- Long battery life
- Safety Standard
- IEC 61010-1 CAT IV 300V / CAT III 600V
- TRUE RMS
- CAT III 300V
- CAT III 600V
- CONDUCTOR SIZE: ϕ33MM MAX
- MAX 1000A
- CONTINUITY BUZZER: 600Ω
- Home
- Our ProductsNEW
CATEGORY
CATEGORY
- Electrical Testers
- Clamp On Power Meters
- Breath Alcohol Tester
- Capacitance Meters
- Dial Indicator
- Block Level Meter
- CO2 Analyzer
- Contact Type Thermometers
- Data Loggers
- Coating Thickness Gauge
- EMF Testers
- Force Gauge
- Insulation Testers
- Loop Calibrator
- LUX / UVA-UVB Meters
- Manometer
- Milli/Micro-Ohm Meters
CATEGORY
CATEGORY
CATEGORY
- About Us
- Contact Us












