-
HI 991002 PH/ORP/TEMP
PRODUCT FEATURES :
- PH/PHMV/ORP PORTABLE METER
- SOILED FOR PLATING BATH, WASTE WATER, SWIMMING POOL & SPA
- HEAVY DUTY-TOUGH ABS PLASTIC ENCLOSURES AND TITANIUM BODY
-
HI 9146-04
PRODUCT FEATURES :
- Water-resistant,microprocessor-based,Dissolved oxygen meter with automatic calibration and temperature compensation.
- Extended Altitude & Salinity compensation.
- range: 02,Saturation 02 & Temperature.
- Weighs 500gms approximately
- O2: 0.00 TO 45.00MG/L
- %SATURATION O2: 0.0 TO 300.0%
- TEMPERATURE: 0.0 TO 50.0C
-
HI 2400
PRODUCT FEATURES :
- For Professional DO Monitoring.
- Essential instrument for testing pharmaceutical and food products as well as for monitoring in water treatment plants.
- allows measurement compensation both for altitude and salinity factors.
- Supplied with polrographic sensors which measures the current generated by the reaction of 92 with Ag for enhanced stability.
- DO: 0.00 TO 45.00MG/L(PPM)
- %SATURATION O2: 0.0 TO 300.0%
- TEMPERATURE: 0 TO 50.0C
-
Lutron DO-5510
PRODUCT FEATURES :
- Dual function meter’s display, 13 mm(0.5″).Super large LCD display with contrast adjustment for best viewing angle.
- measurement & range: Dessolved Oxygen:0 to 20.0 mg/L(liter). Oxygen in Air 0 to 100.0%. Temperature 0℃ to 50℃
- Records Maximum, Minimum and Average readings with RECALL, data hold.
- Multi-display, show oxygen & Temp. at the same time.
- Salt: 0 to 39 % Salt
- Height(M. T.) 0 to 3900 meter
- Microprocessor circuit assures high accuracy and provides special functions and features.
- OXTGEN(DO)
- OXTGEN IN AIR (O2)S
- TEMPERATURE MEASUREMENT
-
HI 98303 & 98304 CONDUCTIVITY METERS
PRODUCT FEATURES :
- Dist Testers are reliable,Pocket sized Instrument.
- Large LCD Display for easy viewing.
- HI 98303 (DIST 3): 1999 uS/cm.
- HI 98304 (DIST 4): 1999 mS/cm.
- One Year Warranty.
- Best Seller.
-
HI 8733
PRODUCT FEATURES :
- Specially designed for use in areas of production and quality control.
- with a built-in temperature sensor and automatic temperature compensation, this is a perfect instrument were Temperature of the solution fluctuates.
- rugged probe for indoor/outdoor measurements.
- RANGE: 0.0 TO 199.9 US/CM, 0 TO 1999US/CM, 0.00 TO 199.99MS/CM, 0.0 TO 199,9MS/CM
-
HI2300
PRODUCT FEATURES :
- Auto-ranging EC,TDS,NaCl, Temperature meter.
- 4-ring EC probe with internal temperature sensor.
- Automatic(ATC), Manual (MTC) or No Temperature compensation.
- Auto-ranging.
- Good laboratory Practice.
- PC compatible
-
LUTRON PMS-713
PRODUCT FEATURES :
- Designed to check the moisture level of wood, concrete,and other non-wood material.
- 6 % to 40 % moisture range on wood.
- 0 to 100% relative moisture value for Concrete and other non-wood material.
- All in one, meter build in the test pins.
- Data hold function to freeze the desired value on display.
- Microprocessor circuit ensures high accuracy and provides special functions and features.
- Operates from DC 1.5V( UM4/AAA)x4 PCs batteries
- Built-in low battery indicator.
- With the pins’ protection cover.
- Durable, long-lasting components,enclosed in strong, compact ABS-plastic housing.
- operating temperature : 0℃ to 50℃
- operating humidity : Less than 80% R.H.
- MOISTURE OF WOOD
- MOISTURE OF CONCRETE
- DATA HOLD
-
SEW 1812L ELCB TESTER
PRODUCT FEATURES :
- 2Lines x 16 Characteristics LCD
- Very Low Consumption.
- Microprocessor Controlled.
- Polarity Trip indicator.
- Accurate Digital readout at disconnection time.
- Automatic Data Hold Function.
- MICROPROCESSOR CONTROLLED
- AUTOMATIC DATA HOLD FUNCTION.
- DISCONNECTION PHASE POLARITY SHOWN ON L.C.D. DISPLAY
- POLARITY TRIP INDICATOR ( POSITIVE OR NEGATIVE PHASE )
- WIRING POLARITY INDICATOR.
- MEASURE VOLTAGE AND FREQUENCY BETWEEN LINE AND EARTH BEFORE TESTING.
-
KEW 5406A ELCB Tester
PRODUCT FEATURES :
- Custom microprocessor controlled for highest accuracy and reliability.
- 3 LEDs for checking correct wiring status.
- 0 and 180 degree phase angle switch permits quick tests and consistent readings.
- Digital read-out of tripping time.
- Constant current source circuitry ensures that a fluctuating mains voltage does not affect the accuracy of readings.
- Large custom digital display readout.
- Visual indication of reversed phase and neutral wiring at socket.
- Designed to IP54 Rating.
- Complies with IEC 61557
- Rated Tripping Current |10/20/30/200/300/500mA
- Fault Condition Settings |× 1/2, × 1, × 5, ×DC,
- |AUTO RAMP
- Trip Current Duration |1000ms, 200ms (×5)
- Lowest Resolution |1ms
- Operating Voltage|230V+10%-15% |(195V~253V)50Hz
- Withstand Voltage |3700V AC for 1 minute
- 3 LEDS FOR CHECKING CORRECT WIRING STATUS.
- 0 TO 180 DEGREE PHASE ANGLE SWITCH PERMITS QUICK TESTS AND CONSISTENT READINGS.
- VISUAL INDICATION OF REVERSED PHASE AND NEUTRAL WIRING AT SOCKET
- DESIGNED TO IP54 RATING. COMPLIES WITH IEC 61557
-
KYORITSU KEW-6016
PRODUCT FEATURES :
- Advanced Anti-Trip Technology(ATT) to avoid RCDs to trip during loop testing.
- Auto test (RCD Measurement):Auto test enables complete testing of RCD (6 tests) while you simply stand by and reset the RCD. All the results are displayed on one screen. No need to scroll.
- RCD Trip current setting:(X1/2, X1, X5, Ramp, Auto,Uc):10/30/100/300/500/1000 mA
- RCD Trip Current diuration: X1/2: 2000 ms , X1: G:550ms / S: 1000ms , X5: 410 ms . Rated Voltage X1/2, X1, X5,
- Ramp,Uc:230 V .
- Earth Resistance:20/200/2000Ω (Auto-Ranging)
- Insulation Selectable voltage range: 250 V/500 V/1000 V . Resistance: 20/200/2000 MΩ(Auto Ranging) ,
- Loop Impedance rated voltage (L-PE, L-PE (ATT), L-N / L-L) :100 to 500 V.
- PSC (L-N/L-L) / PFC (L-PE) rated Voltage : PSC: 100~500 V 50/60 Hz , PFC, PFC (ATT): 100~260 V 50/60 Hz
- Phase Rotation rated voltage:50-500 V 50/60 Hz
- Continuity:20/200/2000Ω (Auto-ranging)
- AC Voltage :500 V
- Frequency : 45 to 65 Hz
- CONTINUITY MEASUREMENT
- INSULATION MEASUREMENT
- LOOP IMPEDANCE MEASUREMENT
- PSC / PFC MEASUREMENT
- RCD MEASUREMENT
- EARTH MEASUREMENT
- PHASE ROTATION
- VOLTAGE MEASUREMENT
- FREQUENCY MEASUREMENT
-
KYORITSU KEW 6010B
PRODUCT FEATURES :
- RCD:10/30/100/300/500mA x1/2, x1, Fast Trip(40ms), DC, Auto Ramp
- Insulation: 500/1000V, 20/200MΩ 1mA Rated Test Current
- Loop Impedance:20/2000Ω 15mA Test Current at 2000Ω (No RCD Trip)
- Continuity:20/200Ω 200mA Test Current
- Test of a large kind of RCD’s:Standard, Selective, AC and A(DC sensitive breakers)
- Uc(Contact Voltage): 100V
- Designed to IEC 61010-1, IEC 61557
- Data Memory:300 measured results
- The stored data can be transferred to PC via Optical Adaptor Model 8212-USB or 8212-RS232C.
- INSULATION RANGE: 500/1000V, 20/200MΩ
- CONTINUITY RANGE: 20/200Ω 200MA
- LOOP IMPEDANCE: 20/2000Ω 15MA
- RCD TESTING AND UC VOLTAGE
- Home
- Our ProductsNEW
CATEGORY
CATEGORY
- Electrical Testers
- Clamp On Power Meters
- Breath Alcohol Tester
- Capacitance Meters
- Dial Indicator
- Block Level Meter
- CO2 Analyzer
- Contact Type Thermometers
- Data Loggers
- Coating Thickness Gauge
- EMF Testers
- Force Gauge
- Insulation Testers
- Loop Calibrator
- LUX / UVA-UVB Meters
- Manometer
- Milli/Micro-Ohm Meters
CATEGORY
CATEGORY
CATEGORY
- About Us
- Contact Us
