-
KYORUTSU 3123A
PRODUCT FEATURES :
- TEST VOLTAGE : 5000V / 10000V
- MEASURING RANGES : 5GΩ/200GΩ(AUTO RANGING) & 10GΩ/400GΩ(AUTO RANGING)
-
KYORITSU 3124
PRODUCT FEATURES :
- Permits a wide range of insulation testing up to 100GΩ at variable test voltage from 1kV to 10kV.
- DC voltage output for recorders.
- Output voltage is shown on the digital display.
- After tests, automatically discharges the charges stored in the circuit under test.
- Operated by rechargeable Nickel-Cadmium batteries.
- TEST VOLTAGE : 1K – 10KV VARIABLE / 10000V
- MEASURING RANGES : 1.6GΩ/100GΩ(AUTO RANGING) /100MΩ
-
Kyoritsu 6018 Multi Function Tester
PRODUCT FEATURES :
- Designed to meet IEC 61010-1 CAT III 600V
- Test leads with remote control switch.(For insulation&Simplified Earth Test)
- Back light function.
- Color coded scales and range switch position for easy reading.
- Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance.
- Can be hung around the neck for both hand’s operation.
- Insulation Testing:Test Voltage:250V/500V/1000V , Resistance: 50MΩ/100MΩ/2000MΩ
- Earth Resistance: 12Ω/120Ω/1200Ω(2/3 Pole) , earth Voltage:0-60V AC
- AC Voltage:0-600V
- INSULATION TEST VOLTAGE RANGE: 250/500/1000V
- EARTH TESTER RANGE: 12Ω/120Ω/1200Ω
- AC VOLTAGE RANGE:0~600V AC
-
MOTWANE DET-20
PRODUCT FEATURES :
- 3 1/2 Digit LCD display with max reading of 1999.
- Rechargable Internal Ni-MH Battery.
- 4 Wire soil Resistivity Measurements.
- Measurement Method 3T & 4Termainal.
- Type tested as per IS-9223.
- E.R. RANGES : 0.01Ω TO 19.99Ω , 0.1Ω – 199.9Ω , 1Ω – 1999Ω
- TEST FREQUENCY : 128 HZ±0.5HZ
-
MEGGER DET4TD2 and DET4TR2
PRODUCT FEATURES :
- 3 1/2 Digit High contrast liquid crystal display.
- IP 54 Protection.
- C spike, P stake and noise check: Automatic.
- Noise rejection: 40V peak to peak.
- Resistance range: 0.01 Ohms to 20K Ohms.
- Earth Voltage range: 0-100Volts.
- 0.01 TO 20K OHMS
- 2-WIRE, 3-WIRE & 4-WIRE TEST
- EARTH VOLTAGE: 0-100 VOLTS
-
KYORITSU KEW 1061 Multi Function Tester
PRODUCT FEATURES :
- Advanced Anti-Trip Technology(ATT) to avoid RCDs to trip during loop testing.
- Earth Measurement: 20/200/2000Ω (Auto-Ranging)
- Insulation Voltage selection range: 250 V/500 V/1000 V. Resistance:20/200/2000 MΩ(Auto ranging)
- Continuity:20/200/2000Ω (Auto-ranging)
- Loop Impedance:L-PE, L-PE (ATT), L-N / L-L rated voltage – 100 to 500 V
- PSC (L-N/L-L) / PFC (L-PE) rated voltage – PSC: 100~500 V 50/60 Hz , PFC, PFC (ATT): 100~260 V 50/60 Hz.
- RCD Trip current setting(X1/2, X1, X5, Ramp, Auto,Uc)- 10/30/100/300/500/1000mA . Trip current duration:X1/2: 2000ms , X1: G:550ms / S: 1000ms , X5: 410ms , Ramp: Goes up by 10% from 20% to 110% G:300ms/S:500msX10 times .
- Phase Rotation:50-500V 50/60Hz.
- Voltage:25 to 500V
- Frequency:45 to 65 Hz .
-
SEW ST-1520 Earth Resistance Tester
PRODUCT FEATURES :
- Earth resistance :- 0-20Ω / 0-200Ω / 0-2000Ω
- Earth voltage :- 0-200 Vac (40-500Hz)
- Display :- 3½ digit (2000 counts)
- Capable of measuring earth resistance and earth
- voltage.
- 2mA measuring current permits the testing of earth resistance without tripping earth leakage current breakers in the circuit under test.
- Auto power off function.
- Timer for test function (count 3-5 minutes).
- Battery operated.
- Data hold function.
- Small and lightweight.
- Calibration performed with supplied test leads.
- LOW BATTERY INDICATION
- DATA HOLD INDICATION
- OVER RANGE INDICATION
-
Kyoritsu 4105A Digital Earth Tester
PRODUCT FEATURES :
- Earth Resistance:- 0~20Ω/0~200Ω/0~2000Ω
- Earth Voltage :- [50,60Hz]: 0~200V AC
- Overload Protection Earth Resistance: 280V AC for 10 seconds across 2 of the 3 terminals Earth Voltage: 300V AC for 1 minute
- Designed to meet IEC 61010-1 safety standard.
- Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance.
- 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.
- DUST AND DRIP PROOF(DESIGNED TO IEC 529 IP54)
- OVERLOAD PROTECTION
- CAPABLE OF MEASURING EARTH VOLTAGE.
-
Kyoritsu 4200 Earth Clamp Tester
PRODUCT FEATURES :
- The earth resistance from 0.05 to 1200Ω can be measured without the auxiliary earth spikes.
- accurate true RMS readings of AC current including distorted waveform from 1mA to 300A.
- A function to detect current, which effects an earth resistance measurement and display “NOISE” mark on the LCD.
- save and display up to 100 measurement data
- Compliant with safety standards of IEC 61010-1 : CAT IV 300V Pollution Degree2
- over range indication
-
TESTO 105
PRODUCT FEATURES :
- Measuring Range: -50 to +275C
- Ideally Suited To Applications In The Food Sector
- Exchangeable Measurement Tips
- 2 Freely Adjustable Limit Values
- Audible And Optical Alarm
- One-Line Display, Illuminated
- Especially Robust, Can Be Cleaned Under Running
- (According To Protection Class IP65).
DOWNLOAD PDF FILE
-
TESTO 106
PRODUCT FEATURES :
- Measuring Range: -50 to 275°C
- Ideal For Use In the Food Sector
- TopSafe: Dishwasher-Safe Protective Cover (IP65),Protects From Dirt And Impact
- Small,Handy And Always Ready To Hand
- Audible And Optical Alarm
- Automatic Final Value Recognition (Auto-Hold)
- Hardly Visible Punctures
-
CIE 305
PRODUCT FEATURES :
- Single Thermocouple Input.
- Handheld Lightweight Design.
- K-Type Thermocouple.
- C or F Annunciators Display.
- Reading Hold Function.
- User-Selectable Resolution.
- 1C or 0.1C
- Maximum Hold Record.
- Fornt Panel Offset Adjustment.
- can Measure From -50 to +1300°C
- With Thermocouple.
- Home
- Our ProductsNEW
CATEGORY
CATEGORY
- Electrical Testers
- Clamp On Power Meters
- Breath Alcohol Tester
- Capacitance Meters
- Dial Indicator
- Block Level Meter
- CO2 Analyzer
- Contact Type Thermometers
- Data Loggers
- Coating Thickness Gauge
- EMF Testers
- Force Gauge
- Insulation Testers
- Loop Calibrator
- LUX / UVA-UVB Meters
- Manometer
- Milli/Micro-Ohm Meters
CATEGORY
CATEGORY
CATEGORY
- About Us
- Contact Us
