-
Digital Coating Thickness GaugeQnix- 4500 Digital Coating Thickness Gauge
PRODUCT FEATURES :
QNix® 4500 was developed for a broad spectrum of use in the automobile and painting industries. This compact gauge allows for extremely accurate measurements of paint and…
-
Digital Coating Thickness GaugeMetravi CTG-01 Digital Coating Thickness Gauge
PRODUCT FEATURES :
Measures coating Thickness on both Ferrous and Non Ferrous materials with interface cable & S/W
The CTG-01 coating thickness gauges work either on the magnetic induction or… -
Digital Thickness GaugeInsize 2871-101 Digital Thickness Gauge
PRODUCT FEATURES :
Ceramic Spindle Tip and Anvil
Buttons: on/off, zero, mm/inch
Data output
Battery CR2032, automatic power off
Code : 2871-101
Range: 0-10 mm/0-0.4 inch
Accuracy: ±0.005 mm
Resolution:… -
Digital Thickness GaugeInsize 2871-10 Digital Thickness Gauge
PRODUCT FEATURES :
Ceramic Spindle Tip and Anvil
Buttons: on/off, zero, mm/inch
Data output
Battery CR2032, automatic power off
Code : 2871-10
Range: 0-10 mm/0-0.4 inch
Accuracy: ±0.02 mm
Resolution:… -
Digital Snap GaugeInsize 2166-12 Digital Snap Gauge
PRODUCT FEATURES :
Code: 2166-12
Range: 0-12 mm/0-0.5 inch
Accuracy: ±0.03 mm
Resolution: 0.01 mm/0.0005 inch -
Digital Force GaugeInsize ISF-1DF500 Digital Force Gauge
PRODUCT FEATURES :
Load Capacity: 500 N(Newton)
Accuracy: ±0.3 percent (of load capacity)
Resolution: 0.1 lbf
Measuring mode: tracking, peak (max.), low and high limits with judgement.
Units: lbf, ozf,… -
Digital Force GaugeLUTRON FG-5100
PRODUCT FEATURES :
100 Kg, Kg/LB/Newton.
Tension or Compression,Peak hold, Zero.
Positive/ Reverse display.
5 digits LCD with back light.
RS-232 computer interface.
100 Kg, wide capacity, high resolution, high… -
Digital Surface Roughness testerInsize ISR C-100 Surface Roughness Tester
PRODUCT FEATURES :
The Insize ISR-C100 surface roughness tester is supplied with a remote control APP for operation via any ANDROID device via blue tooth.The maximum working distance is 16.4…
-
Non-Digital Vernier CaliperInsize 1233-180 Vernier Caliper with fine adjustment
PRODUCT FEATURES :
Insize 1233-180 Vernier Caliper – Meet DIN862 Made of stainless steel Satin chrome plated reading surface
With Fine Adjustment
Model no: 1233-180
Measuring Range (mm/Inch): 0-180 mm/0-7… -
Non-Digital Vernier CaliperInsize 1205-2002 Vernier Caliper
PRODUCT FEATURES :
Model no. 1205-2002
Meet DIN862
Made of stainless steel
Satin chrome plated reading surface
Range: 0-200 mm/0-8 inch
Accuracy: ±0.03 mm
Graduation: 0.02 mm/0.001 inch -
Non-Digital Vernier CaliperInsize 1205-1502 Vernier Caliper
PRODUCT FEATURES :
Meet DIN862
Satin chrome plated reading surface
Range : 0-150 mm/0-6 inch
Accuracy: ±0.03 mm
Graduation: 0.02 mm/0.001 inch -
Non-Digital Vernier CaliperMitutoyo 530-118 Vernier Caliper
PRODUCT FEATURES :
Plain and basic design.
Can measure outside and inside diameter (OD and ID), depth, and steps.
The small vernier face angle (14°) provides easy reading.
Clamping screw…
- Home
- Our ProductsNEW
- CATEGORY
- CATEGORY
- Electrical Testers
- Clamp On Power Meters
- Breath Alcohol Tester
- Capacitance Meters
- Dial Indicator
- Block Level Meter
- CO2 Analyzer
- Contact Type Thermometers
- Data Loggers
- Coating Thickness Gauge
- EMF Testers
- Force Gauge
- Insulation Testers
- Loop Calibrator
- LUX / UVA-UVB Meters
- Manometer
- Milli/Micro-Ohm Meters
- CATEGORY
- CATEGORY
- CATEGORY
FREE SHIPPING
For all those who like our FB page.FIVE STAR RATING
Rated 5 Star by our customers.ONLINE SUPPORT
Online Support Available.
- About Us
- Contact Us