-
FLUKE 922 Airflow meter/Micromanometer
PRODUCT FEATURES :
- Powerful meter provides differential and static pressure, air velocity and flow readings Convenient colored hoses help proper interpretation of pressure readings
- Easy to use without sacrificing performance
- Bright, backlit display for clear viewing in all environments
- User-defined duct shape and size for maximum airflow accuracy
- Resolution down to 0.001 inH2O
- 99 point data storage capacity
- Min/Max/Average/Hold functions for easy data analysis
- Auto power off saves battery life
- AIR PRESSURE : ±4000 PASCALS
- AIR VELOCITY : 250 TO 16,000 FPM
- AIR FLOW(VOLUME) : 0 TO 99,999 CFM
- TEMPERATURE : 0°C TO 50°C
-
HANNA HI3812 HARDNESS TEST KIT
PRODUCT FEATURES :
- Readings from 0.0 to 30.0 mg/L are determined to 0.3 mg/L resolution.
- Readings from 0 to 300 mg/L are determined to 3 mg/L resolution.
- All required materials are included with the test kit, such as the sample beaker, plastic pipette, and reagent dropper bottles.
- Range 0.0 to 30.0 mg/L CaCO₃; 0 to 300 mg/L CaCO₃
- Method: EDTA
- CTK Type: Titration
- ORP RANGE : ±999 MV/span>
- LOW RANGE – 0.0 TO 30.0 MG/L CACO3
- HIGH RANGE – 0 TO 300 MG/L CACO3
-
FLUKE 705 Loop Calibrator
PRODUCT FEATURES :
- A large display and simple, pushbutton interface for ease of use.
- Simultaneous mA and % readout for quick, easy interpretation of readings.
- mA accuracy of 0.02%
- Push button 25% steps for fast, easy linearity checks. Save time over traditional knob type controls.
- “Span Check” for fast confirmation of zero and span.
- Selectable slow ramp, fast ramp, and step to provide smooth outputs for valve slewing and loop functional tests.
- 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM.
- Single 9V battery that is easily changed.
- 0 – 20 mA or 4 – 20 mA default start up modes.
- Current Measurement Range: 0 to 24 mA
- Current Sourcing Range:0 to 20 mA or 4 to 20 mA
- Current Simulation Range:0 to20 mA or4 to 20 mA
- Loop Power While measuring mA, 24 V
- Voltage measurement Range: 0 to 28 V DC
- VOLTAGE RANGE: 0-28 V DC
- CURRENT RANGE: 0-24 MA
- LOOP POWER MEASURING MA-24 V
- CURRENT: MEASUREMENT , SOURCING AND SIMULATION
-
FLUKE 707 Loop Calibrator
PRODUCT FEATURES :
- The Fluke 707 Loop Calibrator is a high performance solution for calibration, repair and maintenance of current loops. The new “Quick Click” knob making it extremely fast and easy to use.
- mA sourcing, simulation and measurement
- 24 V Loop supply with mA measure, including 250Ω HART resistor
- 0-28 VDC measurement to check Loop Voltage
- 1 µA resolution for mA source, simulate and measure.
- Push button 25% steps for fast, easy linearity checks.
- 0-100% “span check” for fast confirmation of zero and span.
- Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests.
- 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM.
- Measures V dc to 28 V.
- Single 9V battery that is easily changed without braking calibration seal
- 0 – 20 mA or 4 – 20 mA default start up modes.
- Innovative output adjustment dial with 1 µA and 100 resolution.
- HART ™ mode connects 250 Ω resistor in series with 24 V loop for compatibility with HART communicators.
- VOLTAGE RESOLUTION: 1 MV
- LARGE DISPLAY AND SIMPLE, QUICK-CLICK INTERFACE FOR EASY ONE-HANDED OPERATION
- HIGHER ACCURACY : 0.015%
-
Fluke 715 Volt/mA Calibrator
PRODUCT FEATURES :
- Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution
- Measure voltage output process signals from PLCs, transmitters
- Source or simulate 24 mA loop current
- Source voltage to 100 mV or 10V
- 24V loop supply with simultaneous current measurement
- Enhanced voltage and current measure and source accuracy
- Improved battery life
- 250 ohm HART resistor with loop power
- Holster features test lead storage
- Compatible with toolpack magnetic hanging system
- Step and linear ramp output function
- Configurable zero and span settings
- Measure / Source mV Range: 0 to 200 mV
- Measure / Source V Range: 0 to 20 V
- VOLTAGE RANGE: 0-100 MV, 0-10 V
- CURRENT MEASURE: 0-20 MA, 4-20 MA
- LOOP POWER: 250 OHM WITH HART RESISTOR
-
FLUKE 787 Loop Calibrator/DMM/Processmeter
PRODUCT FEATURES :
- Clear LCD with backlight; 4,000 counts (30,000 counts for dc current)
- Externally accessible battery for easy battery changes.
- 1000V overload protection on V, ohms,frequency.
- 150V overload protection on mA, backed up by 440 mA 1000V fuse.
- 25% Manual Step plus Auto Step and Auto Ramp on mA output.
- Current Measurement Range 0-1 A, Range:0-30 mA
- Current Sourcing Range: 0-20 mA or 4-20 mA
- Frequency: 199.99 Hz, 1999.9 Hz, 19.999 kHz
- Diode Test 2.400 V (shows diode voltage drop)
- Continuity Beeps for resistance
- DC Current Output(Internal batteryoperation)
- 0.000 to 20.000 mA or 4.000 to 20.000 mA
- Current adjustment modes Manual: Coarse, Fine, 25% step , Automatic: Slow Ramp, Fast Ramp, 25% step
- VOLTAGE RANGE: 0-1000 V AC OR DC
- CURRENT MEASUREMENT: 0-30 MA
- RESISTANCE , FREQUENCY , CONTINUITY AND DIODE TEST
-
Mitutoyo 500-182 Digital ABS AOS Caliper
PRODUCT FEATURES :
- equipped with the AOS (Advanced Onsite Sensor)
- The slider provides smooth, stable and comfortable operation.
- Character height: 9mm (alleviation of fatigue with the high-contrast LCD)
- The ABS (ABSOLUTE) scale requires no origin setting after power-on and also has no limit to response speed.
- Extraordinary battery life
- Range: 0 – 200 mm
- Accuracy: +/- 0.02 mm
- Graduation:0.01 mm
- Type: Digimatic Absolute AOS
- Depth bar: flat
- Mass: 194 g
- Accuracy:≤ 200 mm : ±0,02 mm /> 200 mm : ±0,03 mm (excluding quantizing error)
- Digital step: 0,01 mm
- Digital step: 0,01 mm
- ORIGIN (ABS-Zero):Yes
- Low voltage alarm:Yes
- Functions:Without thumb roller
- Inch-Metric:Metric
-
Mitutoyo 500-754 Coolant Proof Caliper
PRODUCT FEATURES :
- Can be used in workshop conditions exposed to coolant, water, dust or oil.
- Advanced design styling.
- Incorporates absolute measurement system.
- Automatic power-on/off.
- Data output function.
- With thumb roller.
- Supplied in fitted plastic case.
- Hardened stainless steel construction with 4 way measurement, OD, ID, depth, step
- Inch/Metric
- Zero/ABS Key
- Range:0-12 inch (0-300mm)
- Accuracy:±.0015”
- Resolution:.0005″/0.01mm
- Type:IP67 Waterproof rated
-
Mitutoyo 500-197-30 AOS Digimatic Caliper
PRODUCT FEATURES :
- The Mitutoyo 500-197-30 digital caliper has a 0 to 8″ (0 to 200mm) measuring range with 0.0005 (0.01mm) increments for precision and an advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water. Its digital readout LCD shows inch or metric units for versatility, and allows either absolute or incremental measurement readings. The electronic caliper measures inside, outside, depth, and step values for versatility and includes a protective case and SR44 silver oxide battery.
- Model : AOS Digimatic Caliper
- Range: 0-8 inch(0-200mm)
- Accuracy: ±.001 inch
- LCD Resolution: 0.0005 inch(0.01 mm)
-
Mitutoyo 500-196 Vernier Caliper
PRODUCT FEATURES :
- Electromagnetic inductive sensor improves the environmental resistance, reducing false readings caused by dirt, oil and water.
- The battery life has been increased to 3.5 years under normal operation.
- ABS sensor eliminates the necessity of setting the reference when powering on.
- Follows current ABS-CD design with electronic module improvements.
- Compatible with current digimatic peripherals (SPC Cables, U-Wave wireless transmitters, DP1-VR and others) for ABS-CD.
- Order no. 500-196-30.
- Model: AOS Digimatic Caliper
- Range: 0-6inch(0-150mm), Accuracy: ±.001in
- LCD Resolution: .0005inch(0.01mm)
-
Insize 1112-300 Digital Vernier Caliper
PRODUCT FEATURES :
- Made from hardened stainless steel.
- Electronic vernier caliper – 300 mm(12 inch).
- Range: 0-300 mm/0-12 inch
- Accuracy: ± 0.03 mm
- Resolution: 0.01 mm/0.0005 inch
- Buttons: Inch/mm, on/off, zero
- Meet DIN862
- Packed in plastic box
-
Insize 1112-200 Digital Vernier Caliper
PRODUCT FEATURES :
- Basic model
- Buttons: zero, power on/of, inch/mm’
- Meet DIN 862
- Hardened stainless steel construction
- Type Of Product: Digital Caliper(Electronic Type)
- Measuring Range: 0-200 mm/0-8 Inch
- Accuracy: ±0.03 mm
- Resolution: 0.01 mm/0.0005 Inch
- LCD Display
- Home
- Our ProductsNEW
CATEGORY
CATEGORY
- Electrical Testers
- Clamp On Power Meters
- Breath Alcohol Tester
- Capacitance Meters
- Dial Indicator
- Block Level Meter
- CO2 Analyzer
- Contact Type Thermometers
- Data Loggers
- Coating Thickness Gauge
- EMF Testers
- Force Gauge
- Insulation Testers
- Loop Calibrator
- LUX / UVA-UVB Meters
- Manometer
- Milli/Micro-Ohm Meters
CATEGORY
CATEGORY
CATEGORY
FREE SHIPPING
For all those who like our FB page.FIVE STAR RATING
Rated 5 Star by our customers.ONLINE SUPPORT
Online Support Available.
- About Us
- Contact Us